BES DKAC-I, Руководство по программированию

Страница: 8 / 22

DKAC-I / MBAC-I
- Climate gateway
Programming manual
v1.0
www.besknx.com
8
Object Object 10: Window - Open window: 0=Close; 1=Open
Function 1 bit communication object for the activation of open window protection.
Description If a '1' is received through this communication object, for example, a magnetic sensor indicating the
opening of a window, the device will give the order to turn off the climate machine allowing energy
savings. When receiving a '0' through this same communication object, the machine will return to the
state it was previously in case of selecting this option in the parameter set for that purpose.
This communication object will only be available if the option open window protection in the parameters
tab is enabled.
Object Object 12: Swing – Swing: 0=Fixed position; 1=Motion
Function 1 bit communication object to establish the movement of the slats
Description By writing a '1' through this communication object, the movement of the slats will be free while it is set
fixed with a value of '0'.
Object Object 13: Swing - Swing status: 0=Fixed position; 1=Motion
Function 1 bit communication object to read the movement of the slats
Description Through this communication object it is possible to read or notify the current movement of the slats
Object Object 14: Swing – Swing: 0-80%= Fixed position; 100%=Motion
Function 1 byte communication object to establish the opening of the slats.
Description Writing through this communication object, the position or movement of the slats is established.
Object Object 15: Swing - Swing status: 0-80%=Fixed position; 100%=Motion
Function 1-byte communication object for the reading or notification of the opening of the slats
Description Through this communication object it is possible to read or notify the percentage of opening or
movement of the slats of the climate machine
Object Object 16: Internal ERROR – Internal ERROR: 0=No error; 1=Error
Function 1 bit communication object to read or notify an internal error of the machine
Description Through this communication object it is read or notified if an internal error of the climate machine is
received
Object Object 18: External ERROR – External ERROR: 0=No error; 1=Error
Function 1 bit communication object to read or notify an external error of the machine
Description Through this communication object it is read or notified if an external error of the climate machine is
received
Object Object 19: External ERROR – External ERROR: Type
Function 1 byte communication object to notify the type of the external error received from the machine
Description Through this communication object it is notified the type of the external error received from the machine
Object Object 102: Scenes – Scenes
Function 1 byte communication object for the execution or recording of scenes
Description Through this communication object it is possible to execute or record scenes
Object Object 103: Mode – Mode: 0=Cool; 1=Heat
Function 1 bit communication object to select the mode of the machine between cooling and heating.