Bes Ingenium KNX SR510000, Руководство по программированию

Страница: 14 / 20

SR510000
- Sensors
Programming manual
www.besknx.com
14
4.1.4 Parameter Settings
The following parameter setting is generally recommended for this example. The ideal parameters may
change depending on the application or installation.
Parameter name
Recommended setting
General parameters
Smoothing 2
Brightness threshold 20
Sampling time 16
Ch1 Event values Bit event on 1
Bit event off 0
Detection event notification yes
End of detection event notification yes
Ch1 Delays
Channel enable delay 0
Channel disable delay 0
Switch-off delay 15
Ch2 Event values
Bit event off 0
Detection event notification yes
End of detection event notification yes
Ch2 Delays
Channel enable delay 0
Channel disable delay 0
Switch-off delay 20
A Smoothing = 2 and Sampling time = 16 are generally recommended for normal lightning control by motion detection. The
sensitivity depends on the detection area desired so it must be configured according to the area that should be covered.
About the Saturation function, if it is not used it should have a value of 100.