SR510000
- Sensors
Programming manual
www.besknx.com
11
3.4.3
Channel 1/2 Delays
These parameters allow to configure time delays when enabling or disabling the sensor and the time that the light is on when
the sensor is programmed for lightning control.
Name
Channel enable delay
Values
From 0 to 65535
Description When enabling the channel it does not respond until the enable delay time set has elapsed.
Name
Channel disable delay
Values
From 0 to 65535
Description When disabling the channel, it keeps detecting motion until the disable delay time set has elapsed.
Name
Channel switch-off delay
Values
From 0 to 65535
Description
This parameter is the time between the last motion detection and the sending of switch-off events. In
lightning control, the switch-off delay determines how long after a motion is detected the light is to be
switched off again. With every motion, the sensor is retriggered and the countdown is re-started, so the light
is not switched off until there is no motion within the delay time
Содержание KNX SR510000
Страница 1: ...Sensors SR510000 Programming manual...
