Bes Ingenium KNX SR510000, Руководство по программированию

Страница: 5 / 20

SR510000
- Sensors
Programming manual
www.besknx.com
5
3 Programming
3.1 Application program information
Application program. Bes / SRDS510000 (manufacturer / program name).
Dynamic objects table generation: no.
Maximum number of communication objects: 11.
Maximum number of assignments: 33.
3.2 Communication objects table
Objeto Nombre / Función Longitud DPT
Flags
C R W T U
0 Channel 1 – Motion detection: Bit 1 bit 1.001 ● ● ●
1 Channel 1 - Motion detection: Byte 1 byte 5.010 ● ● ●
2 Channel 1 - Motion detection: Temperature 2 bytes 9.001 ● ● ●
3 Channel 1 - Enable / disable channel 1 bit 1.001 ● ●
4 Channel 1 - Master trigger 1 bit 1.001 ● ●
5 Channel 1 - Remaining time (s) 2 bytes 7.005 ● ● ●
6 Channel 2 - Motion detection: Bit 1 bit 1.001 ● ● ●
7 Channel 2 - Motion detection: Byte 1 byte 5.010 ● ● ●
8 Channel 2 - Motion detection: Temperature 2 bytes 9.001 ● ● ●
9 Channel 2 - Enable / disable channel 1 bit 1.001 ● ●
10 Channel 2 - Master trigger 1 bit 1.001 ● ●
11
Channel 2 - Remaining time (s) / Brightness
threshold (lux)
2 bytes 7.013 ● ● ●
3.3 Objects description
Name Object 0: Channel 1 - Detection event: Bit
Function 1-bit communication object for motion detection in channel 1
Description When a motion is detected, the sensor is triggered and it sends the correspondent parameter On. When
the countdown finishes (switch-off delay) it sends the correspondent parameter Off.