Berthold Crocodile miniWorkstation, Руководство по эксплуатации

Страница: 25 / 68

LB 925 Crocodile miniWorkstation 3. Installation
84024BA2 Rev. 03, 04/2020 Page 25 of 68
3.4 Connecting Cables

Cable connections are located at the rear of the instrument
below the power switch. Use the provided power supply and
cables only.
Switch on/ off
DC plug
USB connection
4 unused ports
(do not connect)

For connecting the Crocodile miniWorkstation to PC, use the
supplied USB cable and read additionally chapter 5.1 Software
Installation.
3.5 Operating conditions
NOTICE
Operation Temperature: 10-35°C up to 75% humidity (non-
condensing).
The system can be operated up to 2000m above NN.
Operation outside the specified temperature and humidity range may
cause results to fall outside the specified range.
CAUTION
Always close the acrylic cover before start of any operation to avoid
injury, e.g. of the fingers, caused by moving parts.
Figure 3-3:
Crocodile miniWorkstation rear view