BERTHOLD TECHNOLOGIES LB 3602, Руководство по эксплуатации

Страница: 13 / 43

LB 379
13
2 Installation
The measuring path with the radioactive source is delivered in a box in compliance with
the regulations concerning the transportation of radioactive substances.
Take the shielding out of the box just prior to installation. Until then, store it in a location
that is guarded against unauthorized access.
Work is performed according to the instructions and under the supervision of the Radiation
Safety Officer. It has to be ensured that the lock of the shielding is closed and secured, so
that no unshielded radiation can exit. Make sure the shielding is not tampered with or
damaged.
Very important: Please read the Radiation Protection Guidelines in chapter Radi-
ation Protection and observe them strictly!
2.1 Installation of the Measuring Path
2.1.1 Safety Instructions
2.1.1.1 Measuring Path LB 379
1. The max. pressure in the measuring path must not exceed 10 bar.
2. You have to check whether the resistance of the pipe material and the liner is suitable
for the intended application. The exact material name is stamped on the flange or on
the pipe.
3. The instructions and regulations of the type approval certificate must be observed.
4. Do not open the sealed screws.
C
AUTION
:
A damaged measuring path must be disassembled immediately.
Please inform immediately:
a) the manufacturer or their local agent
b) the competent supervisory authority.