CDP Installation Manual
5
Unloading and Installing the CDP Screen
1.
Unload the four crates from the truck
a.
CDP Base Crate
i.
Remove from truck and position the CDP Base crate so that it is accessible from
all sides
ii.
The CDP Base crate can be unloaded using a 48” liftgate
Figure 1 - CDP Screen Crate
b.
Screen crate
i.
Only handle screen by touching the frame
1.
The inside surface of the screen is sensitive and should not be touched
with bare hands
ii.
The screen is delivered on casters to maneuver into position
1.
** Casters are returned to Bertec in the crate
iii.
The dome crate should be loaded at the very nose of the truck (closest to the
cab) with the OPEN THIS SIDE ONLY sign facing toward the liftgate
iv.
Liftgate delivery
1.
The Screen crate should not be unloaded via liftgate while the crate is
full
2.
Carefully roll screen out of crate
3.
Unload screen using liftgate
a.
48” minimum liftgate
b.
One person should stand inside the dome and hold onto the
screen frame
