CDP Installation Manual
23
Positioning the System in Facility
13.
Positioning CDP Base
a.
4.5” minimum distance from rear of CDP to wall
b.
12” minimum distance from CDP sides to closest wall or obstruction
14.
Assembling the Screen
a.
The screen frame is delivered assembled. If broken down to deliver into the building
reassemble following the previous steps
b.
Install Screen Frame legs
i.
Remove casters by pulling them off from the screen frame while the screen is
resting flat on the ground
ii.
Install legs
1.
Screw the feet into the threaded holes on the base of the legs by hand
2.
Make each foot 4” tall
a.
Figure 32 - Measuring mount feet are screwed into the legs
iii.
Connect legs to the screen frame
1.
Slide feet onto the exposed slotted tube on the screen frame
2.
Secure with (4) 1/4-
28 x 1.75” SSS
(4)
using a 1/8” hex
tool
Figure 33 - Line leg up with insert on screen frame
