Bertazzoni PM3630GX, Инструкция по установке, обслуживанию и эксплуатации, Страница: 3 / 22

3
INDEX:
Installation Instructions……………………………………..……………………….. pag.3
Inserting the hotplate……………………………………………..………………….. pag.3
Requirements……………………………………..……………………………….….. pag.4
Attaching the hotplate……………………………………..…………………………. pag.4
Gas connection……………………………………..………………………………… pag.5
Electrical connection……………………………………..……………………….….. pag.5
Wiring diagrams……………………………………..…………………………….….. pag.5
Room ventilation…………………………………….………………………………… pag.5
Location and venting…………………………………….……………………………. pag.6
Replacement of nozzles……………………………………..……………………….. pag.6
Regulation of burners……………………………………………...…………………. pag.6
Descriptions…………………………………………………………………………… pag.6
User instructions……………………………………………..……………………….. pag.7
Using burners……………………………………………………..…………………… pag.8
Using the electric griddle……………………………………………..………………. pag.9
Cleaning the appliance……………………………………………..………………… pag.10
Figures………………………………………………...…………..…………………… pag.19
Before Installation
If receiving the unit from a transportation company, it is customer’s obligation to inspect the package and
note any damage on the delivery receipt. After delivery have your induction cooktop carefully unpacked, and
again check for any visible damage. If you find any damage on the unit at this point, immediately inform your
dealer or distributor. Although the responsibility for shipping lies with the carrier, your dealer/dis-tributor will
assist you with your claim.
If the unit is not supposed to be installed for some time, you should keep it in its original packaging, stored in
a dry and safe place.
Read through the sections of this manual which pertains to installation, and make sure that all of the
requirements can be met.
Ensure that your electric power supply is correct.
INSTALLATION INSTRUCTIONS
This appliance shall only be installed by an authorized person. This appliance shall be installed in
accordance with the manufacturers installation instructions, IMPORTANT: this appliance must be
installed in accordance with the norms in force of the country concerned.
INFORMATION FOR THE INSTALLER
The installation, all regulations, changes and maintenance referred to in this part must only be carried out by
qualified staff.
A wrong installation can cause damage to persons, animals or things which the manufacturer cannot be held
responsible for.
The safety and automatic regulation devices on the appliances can only ever be changed by the
manufacturer or by the supplier which has been authorised to do so.
INSERTING THE HOTPLATE
After having removed the various loose parts from the internal and external packing, make sure that the
hotplate in not damaged and is suitable for the specific gas usage. The gas type label is on the underside of
the hotplate base.
In case of doubt, do not use the appliance and contact skilled personnel.
Keep all the packing parts (polystyrene foam, cardboard, staples, etc.) away from children.
Consider the critical dimensions of the appliance, before making an opening in the top surface of the bench
top. (relative measurements as per Fig 1- 2).
If your counter is produced from porous materials which tend to swell if in contact with humidity, and water, to
better protect the cut-out, use proper sea-lants on the edge which would prevent any penetration of humidity
and water.
Chamfer all exposed edges of decorative laminates to prevent further chipping.
Radius corners of the cut-out and file them to ensure smooth edges and prevent corner cracking.
Rough edges and inside corners which are not rounded as well as forced fits can contribute to cracking of
counter top laminate.