manualshive.com logo in svg

Bertazzoni AMD6C61BX, Инструкция по установке, обслуживанию и эксплуатации, Страница: 2 / 24

Поделиться
Скачать
Bertazzoni AMD6C61BX Скачать руководство пользователя страница 2

 

2

CONTENTS: 

INSTALLER TECHNICAL MANUAL ............................................................................................................... pg.  2 
Installing the cooker - Installation information ................................................................................................. pg.  2 
Ventilation and aeration of rooms .................................................................................................................... pg.  3 
Height-adjustable feet ..................................................................................................................................... pg.  4 
Intalling the toekick panel ................................................................................................................................ pg.  5 
Intalling the riser .............................................................................................................................................. pg. 6  
Intalling the hob rail and oven handle .............................................................................................................. pg.  7-8-9 
Intalling the system to prevent overturning ...................................................................................................... pg.  10 
Gas connection ............................................................................................................................................... pg.  10 
Adaptation to different types of Gas and burner adjustments .......................................................................... pg.  11-12 
Electric connection .......................................................................................................................................... pg.  12 
APPLIANCE MAINTENANCE - Replacing parts ............................................................................................. pg.  14 
USE AND MAINTENANCE MANUAL ............................................................................................................. pg.  14 
Description of control panel and control types ................................................................................................. pg.  15 
Using burners .................................................................................................................................................. pg. 15 
Using the electric thermostat ........................................................................................................................... pg.  17 
Using the 9+0 switch ....................................................................................................................................... pg. 17 
Using the natural conventional electric oven  .................................................................................................. pg.  18 
Using the ventilated electric oven .................................................................................................................... pg.  19 
Positioning the oven trays & shelves ............................................................................................................... pg.  20 
Using the electric grill - ventilated electric grill ................................................................................................. pg.  21 
Using the thermometer .................................................................................................................................... pg.  21 
Using the self-cleaning oven ........................................................................................................................... pg. 22 
Abnormal operation ......................................................................................................................................... pg. 22 
Cleaning the appliance .................................................................................................................................... pg. 22 
After-sales technical service & spare parts ..................................................................................................... pg.  23 
Overall dimensions .......................................................................................................................................... pg. 23 
 

 

THIS APPLIANCE HAS BEEN DESIGNED FOR NON-PROFESSIONAL DOMESTIC USE. 

 

INSTALLER TECHNICAL MANUAL 

 
 
 

By ensuring this product is disposed of correctly, you will help prevent potential 
negative consequences for the environment and human health, which could 
otherwise be caused by inappropriate waste handling of this product.  
 
The symbol on the product indicates that this product may not be treated as 
household waste. Instead it shall be handed over to the applicable collection point 
for the recycling of electrical and electronic equipment.  

 
Disposal must be carried out in accordance with local environmental regulations for waste disposal. 
For more detailed information about treatment, recovery and recycling of this product, please 
contact your local city council office. 
 

 

INSTALLER INFORMATION 

The installation, all adjustments, transformations and maintenance listed in this part of the manual must be 
carried out only by skilled personnel. 
Improper installation may cause damage to persons, animals or property, for which the manufacture will not be 
held responsible. 
The appliance safety or automatic adjustment devices may be changed during the service life of the system only 
by the manufacturer or by the duly authorised supplier.

 

 

INSTALLING THE COOKER 

After having removed the various loose parts from the internal and external packing, make sure that the cooker is not 
damaged. In case of doubt, do not use the appliance and contact skilled personnel. 

Keep all the dangerous packing parts (polystyrene foam, bags, cardboard, staples, etc.) away from children. 
The appliance can be installed as a freestanding unit, 

on a plinth, 

next to a wall or inserted between two walls 

(Fig.1). A single sidewall that exceeds the height of the work surface is possible. This must be at a minimum 
distance of 70 mm from the edge of the cooker (Fig. 1) 
If installing the appliance as a freestanding cooker, screw the height adjustable telescopic legs supplied to the 
base of the appliance. If installing the appliance on a plinth, screw the levelling feet supplied to the base of the 
appliance. 

 

Содержание AMD6C61BX

























Отзывы:

Нет отзывов