Bertazzoni AMD6C61BX Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 24

Bertazzoni AMD6C61BX Скачать руководство пользователя страница 17

17

Fig.

23

Fig.

24

USING THE 9 + 0 SWITCH (left oven)

The 9 + 0 switch installed in the multifunction oven models is used, along with the thermostat, to control the electric fan
and the oven elements since they can be turned on by turning the 9 + 0 switch knob and the thermostat knob. Turning
just one of the two knobs will not have any effect on the oven except to turn on the oven light or the electric fan when
inserted. The electric oven is heated by 4 elements: one on the bottom, two on the top or one circular; turning the switch
knob (fig.25) turns on the element relative to the symbol indicated on the ring but to be activated the thermostat knob
must be turned until the orange light turns on indicating that the element has been turned on. Placing the switch knob on
any of the nine operating modes turns on the oven light, together with the relative element. Once the temperature and the
elements to be used have been set, the oven elements are turned on and off by the thermostat; therefore, it is normal for
the orange light to turn on and off while the oven is working.
To turn off the electric oven set the switch knob to position 0 to prevent the thermostat from controlling the elements.
Setting the thermostat knob to position 0 turns off the elements but it is still possible, using the switch, to turn on the
electric fan and the oven light.
The switch has 9 different fixed positions corresponding to 9 different types of oven operation:

- the symbol

or

indicates that only the oven light is turned on;

- the symbol

or

indicates that the bottom element (1300W) and the top external element (900W) have

been turned on;

- the symbol

or

indicates that only the top external element (900W) has been turned on;

- the symbol

or

indicates the only the bottom element (1300W) has been turned on;

- the symbol

or

indicates that only the grill element (2000W) has been turned on;

- the symbol

or

indicates that the top external element (900W) and the grill element (2000W) have

been turned on;

- the symbol

or

indicates that the top external element (900W), the grill element (2000W) and the

electric fan have been turned on;

- the symbol

or

indicates that the circular element (2400W) and the electric fan have been turned on;

- the symbol

or

indicates that only the electric fan has been turned on.

When the knob is set to one of these nine positions, the oven light is always on, thus indicating that the oven is being
energised.

«
...
15
16
17
18
19
...
»

Содержание AMD6C61BX

























Отзывы:

Нет отзывов