|17
Remember if you need help contact Customer Care: 1+ (619) 449-2392
The impeller inside of the Water Pump is what pushes water up
through your fountain, allowing you to enjoy the soothing sounds
and wonderful sights of your Bernini™ Fountain. After long periods
of usage, this part will need to be cleaned to make sure your foun-
tain runs optimally.
Water Pump Impeller
Step 1:
Remove the
front of the Water
Pump by grabbing the
sides of the front panel
and pull it off the unit.
Step 2:
Remove the
impeller chamber
cover. This is tightly
fitted on to the impeller
chamber, but will come
off.
Step 3:
Remove
the impeller from its
chamber.
Step 4:
Rinse the impeller
until all debris has been
removed. Then replace
the impeller in the impeller
chamber, put the impeller
chamber back on and
then replace the pump’s
front panel.
Please Note: If pump is cavitating and or water is not flowing
or not flowing properly, check that the water pump impeller
chamber cover is pressed on all the way.
Is your fountain making a loud noise or do you not see water flowing?
If you find the water pump is running, but water is not flowing from your fountain, or you hear a loud
grinding noise coming from your fountain, not to worry, you can try priming the water pump:
Begin by unplugging to turn your fountain off.
Firmly grasp onto the two sides of the large bowl. Agitate the water by
quickly shaking the fountain back and forth for about five seconds.
Plug the fountain in to turn your fountain on.
If the problem still persists, repeat previous step 2 - 3 times. This helps
dislodge any air bubbles in your pump that may be causing
the problem.
If the problem still persists, try the method below:
Begin by unplugging to turn your fountain off.
Remove the Water Pump Door from the Middle Tier by lifting the Water
Pump Door. Now detach the water pump from the feeder tube inside the
Middle Tier. Plug the Fountain Back in to check if water is coming from the
discharge side of the pump. If water is coming out of the discharge side
of the Water Pump all air has been removed. Unplug Fountain reconnect
Water Pump and reinstall Water pump Door plug your fountain in and enjoy.
When removing the water pump, use caution when pulling the pump
from the feeder tube. Pinch the bottom of the feeder tube close to the
pump with one hand and then pull the water pump from the feeder
tube with your other hand.
Priming the Water Pump
Содержание Calvari
Страница 1: ...C alvari F ountain Owner s Manual...
Страница 2: ......