background image

 

 

 

 

C15-2456-W0

 

 

I-Gauge OS-K 

 

C15-2456-W1 

I-Gauge OS-KB 

(With BeeSpi v) 

INSTRUCTION MANUAL 

 
 
 
 

 
 

 
 
 
 
 
 
 
 

 

Narika  Corporation 

Ver.  202008 

Thank you very much for purchasing this product. 

Be sure to read this instruction manual before using it.

 

Содержание C15-2456-W0

Страница 1: ...6 W0 I Gauge OS K C15 2456 W1 I Gauge OS KB With BeeSpi v INSTRUCTION MANUAL Narika Corporation Ver 202008 Thank you very much for purchasing this product Be sure to read this instruction manual before using it ...

Страница 2: ...a dusty humid or hot place Do not use or leave the product in a place exposed to strong direct sunlight a car under the burning sun or a hot place Otherwise it may deform or become defective Do not make an experiment on an unstable table or on an inclined surface Do not expose the product to a strong impact or throw it SPECIFICATIONS CAUTION If the product is used improperly injury or physical dam...

Страница 3: ...l not to bend the gates iii Insert the footing of BeeSpi V into the rail as shown on the picture below If you purchased the OS KB Apply the BeeSpi V to the rail and push it firmly until it is securely attached iv The sliding body for collision experiments is to be put on the rail on the body between the gates It is a grooved plastic body sliding on the rail that has two grooves that fit the rails ...

Страница 4: ...ll and use it for an experiment iv Drop the steel ball or porcelain ball from the highest position of the rail on the slope base When using the BeeSpi V turn on the switch to place the product in standby for measurements For details refer to the manual of BeeSpi V v Record the distance the sliding body moved when the weight collided with it Modify the way of measurement based on the experiment con...

Отзывы: