Be242 Be242RB OEM's Manual V3.X.XX -
January - 2021 page 7
7
Section
3.0 Display measurements
The Be242 features a 4 Digit display, two pushbuttons and 5 yellow LEDs as indicated below.
Use [←F8] and [F9→] to select a menu. Use [ACK-F10] (see the layout in section 1.0) to display the name of the
parameter. The OFF mode of operation shuts down the display and turns on the dot on the right side of it. Push
a button to turn on the panel. The following table includes the functions of the display.
Display Function
Display indications (*)
Pushbutton(s)
Current of the Generator
(0 up to 1000A)
[AXXX]
Ampere L1
[-XXX]
Ampere L2
[_XXX]
Ampere L3
[←F8]
or
[F9→]
A ac menu
yellow indicator
[A -G]
[ACK-F10]
Voltage of the Generator
(60V up to 998V)
[GXXX]
Volt L1-L2
[-XXX]
Volt L2-L3
[_XXX]
Volt L1-L3
[←F8]
or
[F9→]
V ac menu
yellow indicator
[U -G]
[ACK-F10]
Voltage of the Mains
(60 V up to 998 V). If the
Mains is simulated, the
display will show the
message [n-on]
[nXXX]
(V R-S)
[-XXX]
(V S-T)
[_XXX]
(L R-T)
[←F8]
or
[F9→]
[U -on]
[ACK-F10]
Generator Frequency
(20Hz up to 70Hz)
[GXXX]
Hz
[←F8]
or
[F9→]
Hz/RPM menu
yellow indicator
[H - G]
[ACK-F10]
Mains Frequency
(20Hz up to 70Hz)
[nXXX]
Hz
[←F8]
or
[F9→]
[H - n]
[ACK-F10]
Speed
(600RPM up to 4000RPM)
[XXXX]
RPM
[←F8]
or
[F9→]
Hz/RPM menu
yellow indicator
[SPd]
[ACK-F10]
Battery Voltage
(5.5 Vdc up to 36 Vdc)
[bXX.X]
Vdc
[←F8]
or
[F9→]
Engine
yellow indicator
[batt]
[ACK-F10]
Charger Voltage
(3.0 Vdc up to 36 Vdc)
[cXX.X]
Vdc
[←F8]
or
[F9→]
Hours-count:0 up to
50,000 h.
[XXXX]
h
[←F8]
or
[F9→]
h/Prog menu
yellow indicator
[Hour]
[ACK-F10]
(*)NOTE: X indicates a numerical digit, if the measurement is out of range, the display will indicate [- - - -]
[ F9 ]
Display control
[ F8 ] control
F8
F9
4Digit Display
OIL-°C-%FUEL-Vb
Display menu
h-count - Programming
Display menu
Frequency-Speed
Display menu
Vac-Generator-Mains
Display menu
Generator-Current
Display menu
Pushbutton
Pushbutton
Engine
A
V
Hz / R.P.M.
h / Prog.
Display and Menus
