EN
11
8
2 3 5
Presser foot available as optional accessory.
@[\ \ [ [ [;
foot accessory which should be used only
when necessary.
The "Walking foot" accessory equalizes the
feeding of the upper and lower layers of fabric
and improves the matching of plaids, stripes
and patterns. This foot helps to prevent uneven
+
1. Lift the presser foot bar.
2. Remove the "presser foot holder". (see page
26)
3. Attach the "walking foot" to the machine in
the following way.
$
screw and clamp. (2)
ii) Slide the plastic "attaching head" from
the "presser foot bar".
iii) Lower the "presser foot bar".
+ ?
4. Make sure both the "needle screw" and the
?
5. Draw the bobbin thread up. Lay both
threads to the back under the foot.
a Fork arm
b Attaching head
c Needle bar
d Needle screw & clamp
e Presser bar attaching screw
f Presser foot bar
Walking foot
