Bernette B05 Crafter Скачать руководство пользователя страница 71

Страница: 71 / 78

Troubleshooting

2020-09 EN 5220105.00A.04

Troubleshooting

Fault

Cause

Solution

Uneven stitch formation

Upper thread too tight or too
loose.

> Adjust the upper thread tension.

Needle blunt or bent.

> Replace the needle, make sure that a new BERNINA

quality needle is used.

Poor quality needle.

> Use a new BERNINA quality needle.

Poor quality thread.

> Use quality thread.

Incorrect needle/thread
combination.

> Match the needle with the thread size.

Incorrectly threaded.

> Rethread the thread.

The fabric has been pulled.

> Feed the fabric evenly.

Dust or thread remnants under
the tension spring of the bobbin
case.

> Clean the bobbin case (see page 68).

Skipped stitches

Incorrect needle.

> Use the needle system 130/705H.

Needle blunt or bent.

> Replace the needle.

Poor quality needle.

> Use a new BERNINA quality needle.

The needle is incorrectly inserted.

> Insert the needle with the flat side to the back as far up

as it will go into the needle holder and tighten the
screw.

Incorrect needle point.

> Match the needle point to the texture of the material.

Faulty stitching

Thread remnants between the
thread tension discs.

> Fold a piece of thin material and slide the folded edge

(not the raw edges) between the thread tension discs.

Incorrectly threaded.

> Rethread.

Thread is caught in the hook.

> Remove the upper thread and the bobbin case, turn the

handwheel backwards and forwards by hand and
remove the thread remnants.

Incorrect needle/thread
combination.

> Check the needle/thread combination.

Содержание B05 Crafter















































































Результаты поиска

Содержание B05 Crafter

Отзывы:

Бренды по названию

Популярные бренды

Bernette B05 Crafter, Руководство пользователя

Результаты поиска

Содержание B05 Crafter

Отзывы:

Бренды по названию

Популярные бренды