Bernette B05 Crafter, Руководство пользователя

Страница: 34 / 78

Creative sewing
34
2020-09 EN 5220105.00A.04
3.2 Editing stitch patterns
Setting the stitch width
The stitch width can be varied from 0–6 mm for each stitch using the stitch width dial.
NOTICE
Incorrect needle position when selecting a stitch width
Damage to needle and fabric.
> Before turning the stitch width dial, move the needle to the topmost position.
> Raise the needle.
> Turn the stitch width dial until the required stitch width is shown above setting position «•».
Adjusting the stitch length
The stitch length can be adjusted using the stitch length knob.
For black stitch patterns, the stitch length can be set to 0–4 mm.
For buttonholes, the stitch length can be set within the range of the buttonhole symbol on the dial.
For red and gray stitch patterns, the stitch length is predefined and cannot be changed.
> Turn the stitch length knob until the required stitch length is shown underneath setting position «•».
Adjusting the upper thread tension
The upper thread tension must be adjusted depending on the sewing materials, the fabric layers and the
sewing process using the «Upper thread tension» dial.
The base value for the upper thread tension is 4.