manualshive.com logo in svg

Bernette B05 Crafter, Руководство пользователя

Поделиться
Скачать
Bernette B05 Crafter Скачать руководство пользователя страница 19

Sewing preparation

19

2020-09 EN 5220105.00A.04

2.4 Sewing table with accessory box

The sewing table has an integrated accessory box.

> To remove the sewing table, hold the sewing table by the handle (1) and pull it away to the left.

1

> To open the accessory box, tilt the cover towards you.

> To close the accessory box, fold the lid downwards at an angle.

2.5 Raising or Lowering the Feed dog

> To raise the feed dog, push the feed dog lever to the right.

– The feed dog is raised when the first stitch is sewn.

> Slide the «Feed dog lever» left to lower the feed dog.

– The feed dog is lowered.

2.6 Needle

Raising and lowering the needle

> To raise the needle, turn the handwheel anti-clockwise until the needle is in the highest position.

> To lower the needle, continue turning the handwheel anti-clockwise until the needle pierces the fabric.

Содержание B05 Crafter















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды