manualshive.com logo in svg

Bernette B05 Crafter, Руководство пользователя

Поделиться
Скачать
Bernette B05 Crafter Скачать руководство пользователя страница 61

Buttonholes

61

2020-09 EN 5220105.00A.04

> Set the stitch width to 4–6.
> Set the required stitch length in the buttonhole symbol range on the dial.
> Position the fabric under the presser foot so that the marking for the center line is aligned with the

starting point (1).

1

> Press the buttonhole lever all the way down and press it backwards slightly until it clicks in position.

> Hold the upper thread perpendicular to the buttonhole foot with slide.

> Use the foot control to start sewing.

– The buttonhole is sewn from the front of the presser foot to the back.

1.

2.

3.

4.

> At the end of the buttonhole, where the bead meets the bar, stop the machine.
> Raise the presser foot, remove the fabric and cut the thread.
> Pull the upper thread downwards and tie it in a knot.
> If you must interrupt sewing a buttonhole, pull the buttonhole lever forwards and sew 2–3 stitches until

the mechanism has switched over.

> To sew another buttonhole, push the buttonhole lever backwards.

Содержание B05 Crafter















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды