Berner BKE1/1, Руководство по эксплуатации и инструкция

Страница: 6 / 30

Page 5 von 30 13.06.2014
Ver. 2.9 Copyright ©Berner Kochsysteme 2018
Safety regulations for operators
-
Attention! Never fill cold water /ice into the hot unit. Ignoring this advice could lead to
damages of the unit. Consequences of ignoring: The basin could deform, tearing of the
joint material due to extreme temperature fluctuations and therefore destruction of the
seal, that could lead to penetration of liquids or grease and damage the unit itself.
-
If the seal is broken, turn OFF the unit and disconnect from mains. Please do not touch
any part inside the unit.
-
The unit gets hot when the heating element is working. To avoid risk of burns, never touch
the water inside of the basin.
Please pay attention for hot food and liquids during the cooking process
-
ATTENTION: Take care of the potentially slippery floor around the unit, caused by the
cooking processes. There is a serious risk of slipping and falling.
-
In order to avoid overheating of the basin due to boiling dry, never use the unit without
supervision and never turn ON the unit without any water.
-
Turn OFF the unit through the main switch after every use, in order to save energy and to
avoid the risk of burns. It also avoids the unit to be turned on inadvertently.
-
Never use the surface as a work top, not even temporarily!
-
Please only use proper and recommended containers and baskets.
-
Absolutely avoid the penetration of liquids into the unit and the overflow of food and water
over the edge. Don’t clean the unit with a pressure cleaner or water tap.
Improper usage
The correct functioning of the unit can be guaranteed only through proper usage. The
indicated maximum levels of the technical data must not be exceed or fall below under no
circumstances. Improper usage could void the OEM guarantee.
Modifications / usage of spare parts
Please contact the OEM-manufacturer if you intend to modify the unit. To ensure security of
the unit, please use only original spare parts and accessories from the OEM-manufacturer.
During repairs and test runs, please make sure the unit is properly standing on a
secure surface.
Attention! Before cleaning or repairing the unit, it must be completely disconnected from
mains (pull the plug).