Vacuum-type cooling system filler
, no. 099989
The KVB 01 and KVB 01.1 permit repaired cooling systems to be checked for
leaks and refilled free of any air pockets.
To connect the KVB 01 to the cooling system expansion tank, a radiator adapter with con-
necting nipple is also required (corresponding to vehicle model – see accompanying list of
adapters).
Preliminary tasks/requirements
.
The expansion tank of the cooling system has to be empty.
.
Check the capacity of the cooling system (refer to vehicle user’s manual).
.
Compressed air supply at 6-10 bar (87-145 psi).
.
1-2 litres more than the volume of the coolant system being filled.
Particles of rust
and dirt must not get into the coolant system being filled
under any
circumstances.
.
It is advisable to work with a container marked with a scale showing coolant level.
.
The best results will be achieved if the coolant container is at the level as the expansion
tank in the vehicle.
.
Set the heating control switch (in the vehicle) to the 'high heat' position.
!
Exercise caution when dealing with a hot cooling system
0
giving rise to a risk of scald injury!
A
= Filling tube
B
= connection venturi tube
C
= Venturi tube
D
= Tube
E
= Adapter
F
= Expansion tank
G
= Vacuummeter -1 to 0 bar
H
= Connection compressed air
V1, V2 = Stopcocks
GB
Directions for use
5
(Illustr. 1)
V1
V2
E
A
B
KVB..
C
D
F
G
H
Содержание 99989
Страница 3: ......
Страница 28: ......
Страница 29: ...www berner eu 143 51 09 11 F Irrtümer und technische Änderungen vorbehalten ...