24
E N G L I S H
Type of Material to be Cut
Speed Range
Solid wood (hard, soft)
5
Chipboards and hard fi bre boards
2–5
Laminated wood, blockboards, veneered
and coated boards
5
Plastics, fi bre-reinforced plastics, paper
and fabric
2–3
Acrylic glass
2–3
Door cutting (fi g. 7)
1. Place the plunge saw with the outer guard (v) on a
clean, fl at fl oor.
2. Press the shoe (d) with the front side on the door
against the adjusted depth stop.
Dust extraction (fi g. 1)
Your tool is fi tted with a dust extraction outlet (i).
WARNING: ALWAYS
connect the plunge saw
to a dust extractor!
WARNING: ALWAYS
use a dust extraction
device designed in accordance with the relevant
regulations regarding dust emission.
MAINTENANCE
Your Berner power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
WARNING: To reduce the risk of injury,
turn unit off and disconnect machine from
power source
before installing and removing
accessories, before adjusting or changing set-
ups or when making repairs. Be sure the trigger
switch is in the OFF position. An accidental
start-up can cause injury.
WARNING:
If the saw blade is worn replace it
with a new sharp blade.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING:
Blow dirt and dust out of the main
housing with dry air as often as dirt is seen
collecting in and around the air vents. Wear
approved eye protection and approved dust
mask when performing this procedure.
WARNING:
Never use solvents or other harsh
chemicals for cleaning the non-metallic parts
of the tool. These chemicals may weaken
the materials used in these parts. Use a cloth
dampened only with water and mild soap. Never
let any liquid get inside the tool; never immerse
any part of the tool into a liquid.
Optional accessories
WARNING:
Since accessories, other than those
offered by Berner, have not been tested with this
product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury,
only Berner, recommended accessories should
be used with this product.
Berner offers saw blades specially designed for your
plunge saw.
Consult your dealer for further information on the
appropriate accessories.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you fi nd one day that your Berner product needs
replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal
waste sites or by the retailer when you purchase a new
product.
Содержание 94227
Страница 4: ...3 Figure 1 c b a h d f g e j j h u i k e l m s ...
Страница 5: ...4 n o k q p r 2 3 mm 2 3 mm l m Figure 2 Figure 3 ...
Страница 6: ...5 f d h c Figure 4 Figure 5 ...
Страница 7: ...6 t x t y w v z Figure 6 Figure 7 ...
