17
E N G L I S H
PLUNGE SAW
BPS59E
Congratulations!
You have chosen a Berner tool. Years of experience,
thorough product development and innovation make
Berner one of the most reliable partners for professional
power tool users.
POSITION OF THE DATE CODE (fi g. 6)
The date code is stamped onto the side of the base
plate (z).
Technical data
BPS59E
Item number
094227
Type
2
Voltage V
DC
220-240
Power W
1300
No-load speed
min
-1
1750-4000
Blade diameter
mm 165
Maximum depth of cut
90˚ (without guide rail)
mm 59
90˚ (with guide rail)
mm 55
Blade bore
mm 20
Bevel angle adjustment
47°
Weight
kg 5
Fuses:
Europe 230
V
tools
10
Amperes,
mains
U.K. & Ireland 230 V tools
13 Amperes, in plugs
Defi nitions: Safety Guidelines
The defi nitions below describe the level of severity for each
signal word. Please read the manual and pay attention
to these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or serious injury
.
WARNING:
Indicates a potentially hazardous
situation which, if not avoided,
could
result in
death or serious injury
.
CAUTION:
Indicates a potentially hazardous
situation which, if not avoided,
may
result in
minor or moderate injury
.
CAUTION:
Used without the safety alert symbol
indicates a potentially hazardous situation
which, if not avoided,
may
result in
property
damage
.
Denotes risk of electric shock.
Denotes risk of fi re.
BPS59E
L
pA
(sound pressure)
dB(A 92
K
pA
(sound pressure uncertainty) dB(A) 3
L
WA
(acoustic power)
dB(A) 103
K
WA
(acoustic power uncertainty) dB(A) 3
Vibration total values (triax vector sum) determined
according to EN 60745:
BPS59E Vibration emission value = 2.8 m/s
2
Uncertainty K = 1.5 m/s
2
The declared vibration emission value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration emission value may also be used
in a preliminary assessment of exposure.
WARNING:
The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which
the tool is used. This could lead to a signifi cant
underestimate of exposure when the tool is used
regularly in such a way.
An estimation of the level of exposure to vibration
experienced during a given period of work should also take
into account the times when the tool is switched off and
when it is running idle in addition to the trigger time.
This may signifi cantly reduce the exposure level over the
total working period.
EC-Declaration of conformity
MACHINERY DIRECTIVE
BPS59E
Berner declares that these tools have been designed in
compliance with:
2006/95/EC, EN 60745-1, EN 60745-2-5.
Содержание 94227
Страница 4: ...3 Figure 1 c b a h d f g e j j h u i k e l m s ...
Страница 5: ...4 n o k q p r 2 3 mm 2 3 mm l m Figure 2 Figure 3 ...
Страница 6: ...5 f d h c Figure 4 Figure 5 ...
Страница 7: ...6 t x t y w v z Figure 6 Figure 7 ...
