berlinger Mini-tag Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 11

berlinger Mini-tag Скачать руководство пользователя страница 5

5

4)

LED sequence during measurement operation

4.2) Option 2:

Continuous status display

The LEDs blink continuously, green for OK or red for ALARM. Thus, the status / alarm identification

is displayed by regularly blinking according to optional programmed intervals of 15, 30 or 60 seconds.

(see Chapters 5 and 6: LEDs explanation of the blink sequences and alarm identification)

Attention:

Due to increased battery usage, this option reduces the operating time of the device!

The continuous display is terminated when the battery capacity is low. The query is still possible by

pressing the READ button until the battery life has expired.

4.3) Option 1:

Status display only on query

The LEDs only light up when a request is performed. By pressing the READ button once, the status

request / alarm identification can be performed at any time. Thus, the status / alarm identification is

displayed again every 10 seconds for a duration of one minute

(see Chapters 5 and 6: LED indicators

explanation of blink sequences and alarm ID)

. Thereafter, the LED indicator will stop blinking. The status

/ alarm identification can be displayed again by pressing the READ button once more.

«
...
3
4
5
6
7
...
»

Содержание Mini-tag












Отзывы:

Нет отзывов