10
Subjet to change. Please note that all information in this document is correct at the time of publication. Due to our policy of continuo-
us product development, we reserve the right to change this information without prior notice.
11.1) Liability
The manufacturer shall not be held liable:
• if the device was used beyond the manufacturer’s given limitations.
• for any claims due to the improper storage and use of the device.
• for any problems with the temperature controlling and / or cooling unit.
• for the bad quality of any monitored goods.
• for incorrect readings if the device was used beyond its expiry date.
Warranty: 2 years from date of delivery.
11.2) Battery
The Berlinger Mini-tag
®
contains a CR Lithium battery. Please pay strict attention to the following
points:
11.3) Useful life
The devices can be used up to 4 years after production date (1 year storage / 3 years useful life) on
the condition that:
• the status / alarm identification is not displayed continuously (depending on device configuration).
• the buttons are not pressed for very long time, e.g. if jammed between the goods in a shipment.
• storage and operation of the device should remain inside the recommendations of the
manufacturer, especially temperatures below 0 °C or +32 °F could have a negative influence for
the operating lifetime of the battery.
Attention
11) Important Information
12) Contact
If you have any problems with the Berlinger Mini-tag
®
, please do not hesitate to contact our support:
www.berlinger.com / [email protected]
External dimensions (L x W x H)
49 x 25 x 4 mm
Weight
4 g
Storage condition (inactive)
0 °C to +30 °C
Operating temperature
-30 °C to +60 °C
Accuracy of temperature measurement
+/- 0.6 °C (-30 °C to -10 °C)
+/- 0.5 °C (-10 °C to +40 °C)
+/- 0.6 °C (+40 °C to +60 °C)
Measurement accuracy of the time
+/- 2% max.
Temperature measurement interval
Every 1, 5 or 10 minutes
Operating lifetime
Up to 1 year storage / 3 years useful life
Protection class
IP54
10) Technical specifications
The Berlinger Mini-tag
®
monitors temperature exposure and not the product quality. Its purpose is to
signal if product quality evaluation or testing is required.
• The housing of the Berlinger Mini-tag
®
must never be opened nor destroyed.
• Never expose the Berlinger Mini-tag
®
to temperatures above the allowed range (fire, oven, micro
waves, etc.).It may cause injuries.
• Always keep the Berlinger Mini-tag
®
out of the reach of children.
• The battery complies with IATA DGR Packaging Instruction 970 Section 2 and is therefore not
considered as dangerous good.
• Dispose or recycle the Berlinger Mini-tag
®
in accordance with the WEEE2012/19/EU guidlines or
your local regulations. The device may also be returned to the manufacturer for proper recycling.
