![background image](http://html.mh-extra.com/html/berlinger/fridge-tag-2-l/fridge-tag-2-l_operation-manual_2737648027.webp)
English
9.3) Option 3: Read out data from the
fi les generated by the
Fridge-tag
®
2 L
by connecting
it
with a computer
Plug the Fridge-tag
®
2 L into any computer via USB Interface.
Make sure the device is plugged in properly.
In case of an upper or lower temperature overrun, 3 audible
ALARM signals will be triggered immediately. (500ms ON / 500ms
OFF). Thereafter:
During 10 minutes
Every minute 1 ALARM -signal
During 50 minutes
Every 10 minutes 1 ALARM -signal
During 11 hours
Every hour 1 ALARM -signal
Acknowledge audible ALARM: Press the READ button (repeatedly)
Read out Audio ALARM
(optional factory setting)
Wait suffi cient time for the device to generate the ASCII and PDF
fi les (depending on the programming, this process may take a
couple of minutes). You can see that the device is working from the
continuously appearing arrows in the upper display area.
Note:
This process must not be interrupted, until the tick appears
on the display, indicating that the report creation is complete.
-27d
-25d
-23d
-21d
-19d
-17d
-15d
-13d
-1
1d
-9d
-7d
-5d
-3d
yesterd.
-29d
-
28d
-26d
-24d
-22d
-20d
-18d
-16d
-14d
-12d
-10d
-8d
-6d
-4d
-2d
today
Fridge-tag 2
Time / Alarm duration
SET
Temperatur / Min. - Max
Alarm state
=OK
=ALARM
READ
®
27