3/6
09/2015
Blind insert comfort
5. Information for electricians
5.1 Installation and electrical connection
DANGER!
Touching live parts can result in an electric shock.
An electric shock can be lethal.
Disconnect the connecting cables before working on the device and cover all live
parts in the area!
Circuiting and mounting of shutter insert
Figure 2: Shutter insert circuiting diagram
A MCB max. 10 A has been installed as device protection.
Circuit shutter insert according to circuiting diagram (Figure 2)
Mount shutter insert in wall box (recommended: deep box). The connecting terminals must
be at the bottom.
Attach frame and application module (see instructions for application module).
Control by sensors
Sensors such as wind/precipitation sensors are used e.g. to protect awnings from damage. If a
threshold is exceeded on the sensors, blinds/awnings etc are retracted.
When using sensors, the operating mode might have to be changed to protection mode
(see Cover instructions).
(7)
(7) Sensor (e.g. wind/precipitation)
Connect sensor according to connection diagram (Figure X).
