Berker 7531 00 01, Руководство по эксплуатации

Страница: 45 / 100

45
GB Operation
Activating the permanent manual control mode
Keypad operation is programmed and not disabled.

Press the key for at least 5 s.
LED is on, LEDs
A1 is flashing, permanent manual control
mode is activated.
Deactivating the permanent manual control mode
The device is in the permanent manual control mode.

Press the key for at least 5 s.
LED is off, bus operation is on.
Switching outputs: On deactivation of the manual control mode,
the output relays are switched - depending on programming - over
to the position then active, e.g. forced control, logic operation.
Shutter outputs: Depending on programming, the blinds/shutters
move to the position active at the time of deactivation of the
manual control mode, e.g. forced-control position, safety or sun
protection position.