Berker 7531 00 01, Руководство по эксплуатации, Страница: 44 / 100

44
GB Operation
Deactivating the temporary manual control mode
The device is in the temporary manual control mode.

No key-press for 5 s.
- or -

Press the key briefly < 1 s several times until the actuator quits
the temporary manual mode.
LEDs A1...A8 or A1...A16 are no longer flashing, but indicating
the output status.
Switching outputs: Depending on programming, the relay outputs
are switched over to the position active at the time of deactivation
of the manual control mode, e.g. forced control, logic operation.
Shutter outputs: Depending on programming, the blinds/shutters
move to the position active at the time of deactivation of the
manual control mode, e.g. forced-control position, safety or sun
protection position.