Push button comfort 1- 4gang, Flush-
mounted (Up)
751616xx, 751626xx, 751646xx
Technical
Documentation
© Gebr.Berker 2004
Act. version: 10.08.2004
Page: 10 / 23
(subject to prior change)
7516y6xx.doc
Part 2
Manual switch-over between the two operating levels
The push-button comfort 4-gang can be switched by means of a 3-push-button actuation (push-buttons 1+5+8) and
push-button code between the two operating levels (the "Operating level switch-over" parameter must then be set to
"manual" or "via object and manual").
The operating level switch-over is effected by means of the 3-push-button actuation for approx. 3 s and by entry of
the parameterized push-button code. The following illustration shows manual switching from operating level 1 to
operating level 2. Switching back to operating level 1 is analogous with the first procedure.
1
5
8
operating
level 1
1
2
3
4
switch-over through 3-key actuation:
press keys 1+5+8 at the same time
for about 3 to 8 sec.
operation-LED
flashing
(280 ms pulse)
operating level 2
is active
enter key code:
press the 4 keys sequentially
(e.g. 4-3-2-1)
Remarks:
•
The function of the operation LED (green) for an active operating level 1 is parameterized on parameter card
"General", whereas the function of the operation LED for an active operating level 2 is parameterized on parameter
card "Operating level".
•
If the "Switch-over" parameter is set to "Switch-over to level 2 for a time interval", the push-button comfort switches
back automatically to operating level 1 after the preset time.
