Push button comfort 1- 4gang, Flush-
mounted (Up)
751616xx, 751626xx, 751646xx
Technical
Documentation
© Gebr.Berker 2004
Act. version: 10.08.2004
Page: 12 / 23
(subject to prior change)
7516y6xx.doc
Part 2
Changing the push-button code
The push-button code is parameterized in the ETS and can be changed in the push-button comfort 4-gang by local
manual operation.
Push-button code change by local operation of the push-button must have been enabled beforehand in the ETS in
the "Local adjustmet of push-button code" parameter.
The push-button code is changed by means of the so-called "3-push-button actuation, i.e. pressing 2+6+7 for at least
8 s followed by the entry of the old push-button code. This is confirmed by all 8 status LEDs flashing at the same
time. The new code can be entered thereafter.
The following illustration shows how to change the push-button code:
7
6
1
2
3
4
switch-over through 3-key actuation:
press keys 2+6+7 at the same time
as long as min. 8 sec.
8 status LED
flashing
enter old key code:
(z.B. 4-3-2-1)
2
operation-LED flashing
(120 ms pulse).
1
2
7
6
enter new key code:
(e.g. 6-7-1-2)
operation-LED switches off briefly
status-LED all off
Remark:
•
A push-button code change can be made in operating level 1, in operating level 2 and when the complete push-
button is locked.
