Air Purifier with UV Light
G873
Instructions for Use
Please read and retain these instructions for future reference
M:1.5m/s
H:2.0±0.5m/s
IMPORTANT
1.
Your air purifier is designed for easy use and maintenance. Make sure that the UV bulb, HEPA and
activated carbon filter; Tio2 filter are properly installed before use.
2.
Selecting the proper locations, with a flat, stable surface. Do not place on or near heat sources such as
stoves, radiators or heaters, or in direct sunlight.
3.
Plugging in the Air Purifier (Note: Always unplug the air purifier before moving or servicing the unit.
4.
Press “POWER” to switch the unit on or off, when the unit starts, the fan speed is set to “L”-low.
5.
Press the “SPEED” button to choose fan speed (L – Low, M – Mid, H –High).
6.
Press the "TIMER" button to set time 2, 4, 8 hours. When the unit is operational the LED light will be
illuminated.
Maintenance
For quick air cleaning, please set the speed control to the High-speed setting. After about 30 minutes, set
the speed control to Lower speed setting.
To maintain fresh air in your room all the time, set the speed control to Low-speed setting;
For night-time use, please set the speed control to low for quiet air cleaning.
HOW TO CLEAN AND REPLACE
Wipe the enclosure, control panel, and cord with a damp cloth or sponge.
The intake grille can be removed and washed in warm, soapy water. Do not place in dishwasher. Make
sure the grille is completely dry before reinstalling.
The outlet grille should simply be dusted. It should not be immersed in water.
No part of the air purifier should be placed in dishwasher.
Pre Filter: Clean every three months.
HEPA Filter: Replace every six months.
Activated Carbon: Replace once a year.
Periodically remove dust from the anion outlet with s dry brush after disconnecting the power supply.
Disconnect the power supply to frequently clean the anion outlet with a sanitary dry cloth (pure air
outlet) to maintain cleaning effect.
Warning! To reduce risk of electric shock
Always unplug before cleaning;
Do not immerse in water or other liquid
Troubleshooting Guide
The following section provides the solutions to many common problems and questions. If your air purifier is
not working correctly, review these solutions first.
1. The Air purifier will not turn on
● Are the intake grille and the outlet grille installed and locked into place?
● Is the air purifier plugged into a powered outlet?
● Is the fan speed knob turned on?
2. Reduced Air Flow or Poor Filtering
