Air Purifier with UV Light
G873
Instructions for Use
Please read and retain these instructions for future reference
● The intake or outlet grille may be blocked. Make sure nothing is in front of or on top or the air purifier.
● The HEPA and activated carbon filter may be clogged. Check the filters and replace them, if necessary.
3. Germicidal UV Bulb does not light
● Is the UV switch turned on?
● Is the fan running? The UV bulb will not work unless the fan is on.
● The bulb may be burned out. Have UV bulb replaced by an electrician.
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363
13-amp
plug. If you have to replace the fuse, only those that are ASTA
or BSI approved to BS1362 and with a rated current of
13-amps
should be used. If there is a fuse cover fitted,
this cover must be re-fitted after changing the fuse. If the fuse cover is lost or damaged the plug must not be
used. Spare fuse holders and fuses are available from electrical outlets. If the socket outlets in your home or
office are not suitable for this product’s plug, the plug must be removed and disposed of safely. Attempts to
insert the plug into the wrong socket is likely to cause electric hazard. A replacement plug should be wired
according to the following instructions:
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer layer of
flexible plastic. This product is
double insulated
; the wires in the cord set are colour coded in the following
way:
BLUE
NEUTRAL
BROWN
LIVE
GREEN & YELLOW
EARTH
The diagram shows the key features of a correctly wired three-pin
mains plug.
Note:
Double insulated appliances do not need the green &
yellow Earth wire. They may only have the Brown and
Blue wires.
