Bergen Intrepid Magnum Tazer, Руководство пользователя, Страница: 67 / 88

Use the dowel to push the bearing carrier all the way into the boom to
the rear or 22” mark. Lubricate the fwd bearing carrier with Windex
and install it into the boom as well.
Push this bearing carrier in up to the 10” or front mark. While working
on the next step, the Windex will evaporate, allowing the rubber o-
rings to secure the bearing carriers in place in the Boom. If you ever
need to remove the bearing carriers, squirt more Windex into the boom
and push them out with the wooden dowel.
Cut 1” off of one end of the arrow shaft. This is important to get rid of
the end of the arrow shaft that is NOT formed to the correct size. Now
measure and cut the arrow shaft at 31”