Bergen Intrepid Magnum Tazer, Руководство пользователя, Страница: 50 / 88

Roughly center the flybar in the seesaw and lightly tighten the flybar
arms with 3X3 setscrews, while leveling the flybar arms to each other
by sighting across the head.
Measure both sides of the flybar, ensuring they are EXACTLY the same,
moving it in and out as necessary. We do NOT put flats on the fly bar to
prevent a stress riser, meaning this would typically be where the
flybar would BREAK in flight…When you are happy with the
measurement AND the flybar arms are level to each other, then go
back and loctite the setscrews, one at a time, holding the flybar arms
in place.
Install the flybar paddles, using the front hole, and count 19-21 turns
onto the flybar. This will ensure proper thread length into the paddle.