BERG KOMPBERG ZX75, Руководство по эксплуатации и техническому обслуживанию

Страница: 4 / 30

1. Information concerning the document
This operating and maintenance manual is an integral part of the machine. It includes the
information necessary to start, operate and maintain the compressor and requirements for its
safe operation.
Following the manual rules will help you:
▪
Avoid hazards,
▪
Reduce repair costs and downtime,
▪
Increase the machine reliability and life.
Getting familiar with this manual in detail, using the machine in accordance with descriptions
included in it and following all safety conditions are the basis for correct and safe operation of
the machine.
In addition to the operating and maintenance manual and the regulations applied in the country
of destination and health and safety at work regulations applied locally at the workstation, the
generally recognised technical rules for safe and correct work are also valid.
1.1. Scope and intended use of the manual
The operating and maintenance manual is intended for qualified / suitably trained operating
personnel of the compressor. The personnel assigned to operation of the compressor must,
before starting work, get familiar with the manual contents, in particular the “ Health and safety
at work regulations” section.
The manual includes
▪
Description of daily service and maintenance of the compressor and control system,
▪
Technical documentation of the electrical part. It includes the data necessary to perform correct
connections and repairs of the electrical equipment,
▪
Technical documentation of the mechanical part. It includes the data necessary to perform repairs
of the mechanical equipment,
▪
Technical documentation of the control system. It includes the data necessary to switch on and
off, and set operating parameters of the compressor.
The qualified personnel is understood to be the persons who because of received training,
experience and knowledge of important standards, documentation and regulations concerning
safety and operating conditions were authorised to carry out necessary operations and are able
to recognise and avoid possible hazards.
1.2. Intended use of the compressor and conditions of safe use
The compressor is designed to produce only compressed air. It should be installed in accordance
with the stipulations concerning the compressor installation and connection. The compressor
must not be used for any other purposes that are non-compliant with its intended use. The
manufacturer shall not be liable for any damage resulting from that reason. In that case, the risk
is born by the machine user only.
During the compressor operation, you must follow the procedures given in the “Maintenance”
section as regards scope and frequency of maintenance work and materials to be used.