31
ENGLISH
SETTINGS
MENU
SELECT OPTION
TIME SCHEDULE
12.1 Settings
Select this function to modify the following settings
:
-
TIME AND DATE
-
LANGUAGE
-
BACKLIGHT.
To access the desired setting, it is necessary to highlight it using the
“up”
and
“down”
keys and then pressing
“ok”
to confirm the selection.
Press
“back”
to return to the start screen without making any selection.
TIME & DATE
LANGUAGE
SETTINGS
SELECT OPTION
BACKLIGHT
12.1.1 Time and date
Press
“ok”
to highlight in sequence HOURS, MINUTES, DAY, MONTH,
YEAR and press the
“up”
and
“down”
keys to change the desired values.
Once the sequence has finished by pressing
“ok”
, the settings will be
saved and the display will return to the initial screen.
By pressing
“back”
at any time the system will return to the
SETTINGS
cancelling the changes that were made
.
12
17
:
ENTER TIME AND DATE
TIME & DATE
USE THE ARROWS TO MODIFY
18 / 11 / 2013
12.1.2 Language
Press the
“up”
and
“down”
keys to select the desired language.
Pressing
“ok”
the language selection is confirmed and the display returns
to the initial screen.
Pressing
“back”
the system returns to the
SETTINGS
screen without
changing the system’s language.
ENGLISH
LANGUAGE
SELECT LANGUAGE
ITALIANO
12.1.3 Backlight
The screen saver display (backlight off) is automatically activated when
the time, that has been set in parameter \ MENU \ SETUP \ BACKLIGHT,
elapsed without having pressed any buttons.
In the screen saver the current time is normally displayed.
When there is a heat request, the current time is replaced with the boiler
flow temperature and turns on the icon concerning the type of request in
progress.
A message for the system efficiency level can be displayed in the top of
the screen:
-
HIGH EFFICIENCY (if the average value of the return probe > 55°C)
-
OPTIMUM EFFICIENCY (if 25°C < average value of the return probe <
55°C)
.
: 30 days
05:11
42
OPTIMUM EFFICIENCY
°C
: 30 days
12.1.4 Time schedule
Selecting this function, only if the time schedule is enabled (POR=1), it is
possible to change the following:
-
MAIN
-
ZONE 1
-
ZONE 2
-
DHW (only if a storage tank is connected).
To access the desired timer programme, it is necessary to highlight it using
the
“up”
and
“down”
keys and then pressing
“ok”
to confirm the selection.
Press
“back”
to return to the start screen without making any selection.
For a detailed description of the scheduled programming timer, please refer
to the section
“13 TIME SCHEDUKE”.
NOTE:
- MAIN, ZONE 1 or ZONE 2 parameters are available if the programming
timing of the affected area is active
- DHW parameter is available only if a storage tank
has been added to the
boiler
18/11/2013
12:17
DHW
MON
MAIN
ZONE 1
ZONE 2
SCHEDULE
SELECT THE ZONE
ZONE 2
13 TIME SCHEDULE
Select the desired day using the
“up”
and
“down”
keys.
A table will be displayed indicating the day and the time frames already
present. Press
“ok”
to access the programming for the selected day.
Pressing
“back”
takes you back to the initial screen without making any
selection
.
SELECT
A DAY
START
MAIN
THURSDAY
07:30
11:30
18:00
END
08:30
13:30
22:30
ZONE SCHEDULE
Once the selection has been made, the user can choose from among the
following options:
-
ADD
-
MODIFY
- DELETE
-
COPY.
