Bercomac BERCO 701011-1, Руководство пользователя

Страница: 9 / 20

Assembly & initial set-up
7
DANGER
To avoid serious injury or death:
•
Escaping hydraulic oil under pressure can have
sufficient force to penetrate skin, causing serious
personal injury. If injured by escaping fluid, obtain
medical treatment immediately.
•
Wear protective gloves and safety glasses or goggles
when working with hydraulic system.
•
Before disconnecting hydraulic line or performing
work, relieve all hydraulic pressure
•
Visually check for hydraulic leaks and broken, missing,
or malfunctioning parts and make necessary repairs
before applying pressure to the system. Do the same
validation after applying pressure to the system (use a
piece of cardboard not your hands to detect leaks).
IMPORTANT:
*It is the user / or the person who does the installation’s
responsibility to install the hoses in such a manner that
they do not come into contact with any mobile elements
of the vehicle (the wheels or the subframe), sharp edge,
hot surface in all operating conditions if not, this could
lead to damages.
IMPORTANT: If manipulating the hydraulic commands
do not create any movement, one hose from the
hydraulic lift system is interchanged with one hose for
the chute rotation.
NOTE: Use a coloured tie wrap (not supplied) to identify
the different hoses to simplify future installation.
IMPORTANT: Twists in the hydraulic hoses will wear them
out prematurely. If the quick couplers are not well aligned,
slightly loosen the fitting (item 3) in order to rotate the
female quick coupler (item 4).
Lubricate the threads with
hydraulic fluid and tighten the joint at 25 ft-lb.
IMPORTANT: Twists in the hydraulic hoses will wear them
out prematurely. If the quick couplers are not well aligned,
slightly loosen the fitting (item 3) in order to rotate the
female quick coupler (item 4).
Lubricate the threads with
hydraulic fluid and tighten the joint at 25 ft-lb.
ATTENTION: Over tightening is one of the greatest causes
for oil leaks.
Test the hydraulic controls in order to make sure that they
coordinate with the movement of the accessory. If they do
not match, reconnect the hoses in the right order.