Bercomac BERCO 700286-1, Руководство пользователя

Страница: 8 / 32

6
ASSEMBLY
STEP 1
ROTARY BROOM PREPARATION
IMPORTANT: TORQUE ALL BOLTS ACCORDING
TO TORQUE SPECIFICATION TABLE (SEE TABLE
OF CONTENTS) WHEN STATED: TIGHTEN FIRMLY.
REFER TO PARTS BREAKDOWN SECTION FOR
PARTS IDENTIFICATION
See adaptor mounting Instruction Booklet for
adaptor preparation and installation of the
adaptor.
Install the joint block (item 1) on the latch rod (item 2)
and secure with a retaining ring (item 3).
Install the control rod (item 4) in the joint block (item
1) and secure with a 2.5 mm hair pin (item 5).
Install the parking stands (item 1) in the stand holders
(item 4). Secure with a 5/32 x 1" cotter pin in the
upper hole (item 2) of each parking stand.
Set the parking stands in their most extended position
and secure in place with a 2.5 mm hair pin (item 3).
Prepare broom
Install the parking stands