Bercomac BERCO 700286-1, Руководство пользователя, Страница: 9 / 32

7
ASSEMBLY
Attach the rotary broom to the subframe as shown.
Make sure the rotary broom is pushed in until locked
into place by the springs (item 1).
Follow the instructions for the belt
installation in the Adaptor Instruction
Booklet and the Subframe Owner’s
Manual.
STEP 2
ROTARY BROOM INSTALLATION
7
WARNING
7
TO PREVENT INJURIES:
Stop the motor.
Apply parking brake.
Remove the ignition key.
Disconnect the wire from the spark plug(s) and
keep away from spark plug(s) to prevent accidental
starting.
Install the rotary broom
7
DANGER
7
NEVER OPERATE THE ROTARY BROOM
WITHOUT:
Brush hood
Belt guard
Gear box guard
Extension guard and any other safety protection
devices in place.
HANDLE INSTALLATION
Install the 1/2 x 3" handgrip (item 1) on the handle
(item 2).
Insert the handle through the plastic grommet on the
handle support (item 3) and on the control rod (item
4).
Secure with a 2.5 mm hair pin (item 5).
NOTE: If the subframe includes a handle extension
(item 6), install it between the control rod (item 4) and
the handle (item 2).
VERIFY TIRE PRESSURE:
Check and adjust tractor tire pressure as follows:
Front tires: 14-15 psi
Back tires: 7-8 psi
Tire pressure must be even on both sides of the
tractor.
Install the handle