
ENGLISH
Convector Heater with Turbo Fan Use instructions
11
OPERATION OF THE HEATER
NOTE
: It is normal when the heaters are turned on for the first time or when they are
turned on after having not been used for a long period of time the heaters may emit some
smell and fumes. This will disappear when the heater has been on a short while.
Fig.5
Choose a suitable location for the heater, taking into account the safety instructions above. Insert
the plug of the heater into a suitable socket. Turn the thermostat knob fully in a clockwise direction
to the maximum setting. Turn on the heating elements by means of the rocker switches on the side
panel. When the heating elements are on the switches will illuminate. For maximum heat output
both switches should be on. When the desired room temperature has been reached, the thermostat
knob should be turned slowly anti-clockwise until the thermostat is heard to click off and the lights
on the element switches are seen to go out. After this the heater will keep the air temperature in the
room at the set temperature by switching on and off automatically.
CLEANING THE HEATER
Always un-plug the heater from the wall socket and allow it to cool down before cleaning.
Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.
Do not use any detergents or abrasives and do not allow any water to enter the heater.
STORING THE HEATER
When the heater is not used for long periods of time it should be protected from dust and stored in
a clean dry place.
TECHNICAL DATA:
Power: 2000 W
Power supply: 220-240V – 50 Hz
For any improvement reasons, Beper reserves the right to modify or improve the
product without any notice.
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), re-
quires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the reco-
very and recycling of the materials they contain, and reduce the impact on human health and the
environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation,
that when you dispose of the appliance, it must be separately collected.