
Convector Heater with Turbo Fan Use instructions
10
IMPORTANT Read these instructions fully before using the heater. Retain these instructions
for future reference.
SAFETY INSTRUCTIONS
(to be read before operating the heater)
1.Do not use the heater unless the feet are correctly attached.
2.Ensure the power supply to the socket into which the heater is plugged is in accordance with the
rating label on the heater and that the socket is earthed.
3.Keep the power cord away from the hot body of the heater.
4. Warning: Do not use this heater in the immediate surroundings of a bath, a shower or a swimming
pool.
5.Warning: In order to avoid overheating, do not cover the heater.
6.Indoor use only.
7.Do not place the heater on carpets having a very deep pile.
8.Always ensure that the heater is placed on a firm level surface.
9. Do not place the heater close to curtains or furniture in order to avoid a fire hazard.
10.Warning: heater must not be located immediately below a socket-outlet.
11.Do not insert any object through the heat outlet or air grilles of the heater.
12.Do not use the heater in areas where flammable liquids are stored or where flammable fumes
may be present.
13.Always unplug the heater when moving it from one location to another.
14.Warning: If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or a similarly qualified person in order to avoid a hazard.
15.This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
16.Children should be supervised to ensure that they do not play with the appliance.
DESCRIPTION OF PRODUCT Fig.1
1 - Thermostat
2 - 3 power switch with indicator light
3 - Carrying handles
4 - Air intake grille
5 - Holes for wall mounting
6 - Body
7 - Feet
8 - Air intake grille
9 - Power Cable
ASSEMBLY OF THE HEATER
Before using the heater, the feet (supplied separately in the carton), must be fitted to the unit. These
are to be attached to the base of the heater using the 4 self-tapping screws provided, taking care to
ensure that they are located correctly in the bottom ends of the heater side moldings.
ACCESSORIES
10 - Support brackets
11 - Screws
12 - Dowels