Chapter 3
Configuration
Page
22
Step 4
Add the next increment of fluid calculated in step 2 into the tank. Select ’25.0%’ and then ‘Enter’ to
save set point.
Repeat the process for 37.5%, 50%, 62.5%, 75%, 87.5% and Full.
Mode: Custom
Use custom mode if the set point voltage values are already known from a previous tank meter
setup. They can be directly entered without any other calculations.
Systems In Operation
The systems in operation functions of this meter can be used to monitor essential circuits and
inform the skipper about the circuit’s state. Up to 8 inputs can be used as Systems Operation and
they can all be displayed on the Mimic page for quick reference.
Setup
The systems in operation inputs are factory set. If you need to alter the voltage calibration on any
of the inputs see the DC Voltage Configuration section.
Settings
Circuit Status
Label
