Chapter 3
Configuration
Page
20
Step 1
Ensure both Battery Voltage and Current are calibrated.
Refer to DC Current & DC Voltage
Calibration section.
Step 2
Check ‘Voltage Input’ and ‘Current Input’ settings. They should be linked to the same battery you
are calibrating the Capacity for.
Step 3
Enter the Maximum Capacity for the Battery.
Step 4
Enter the Peukerts Exponent.
Note: If the correct Peukerts Exponent is not known or calculated incorrectly it can have a negative
effect on the accuracy of the capacity state.
Settings
Voltage Input
This is the reference number of the voltage that is displayed on the Battery Capacity page and also
used to perform a capacity reset at a predetermined value and time.
Current Input
This is the reference number of the current that is displayed on the Battery Capacity Page and also
used to perform a capacity reset at a predetermined value and time.
Actual Capacity
This is the actual battery capacity and will change in relation to the battery state.
Max Capacity
This is the maximum battery capacity.
Reset Voltage
If battery voltage reaches this value or higher for the predetermined reset time, capacity will reset
to a maximum state.
Reset Current
If battery current reaches this value or lower for the predetermined reset time, Capacity will reset to
a maximum state.
Reset Time
Timer for resetting battery capacity if reset voltage and/or reset current requirements are met.
Charge Efficiency
