Copyright © BEP Marine Limited, All rights reserved
Product version: DCM3.2
Page 15
Date: 12/05/05
To enter programming mode
Hold buttons V & C down simultaneously for approx. 3
seconds the display will read
EXIT
RESET
SETUP
Press ‘V’ to exit programming mode.
Press ‘A’ to enter amps zero and reset mode.
Press ‘C’ to enter Setup mode.
Amps Zero (figure 2)
While in programming mode screen (figure 1):
Press ‘A’ to enter amps zero and reset mode
Press ‘V’ to exit.
To set amps zero point press button A.
“AMPS ZERO” will flash for approx 2-3 seconds, zero point
has now been set. The screen will return to the programming
mode screen (figure 1)
Factory Reset mode (figure 2)
While in programming mode screen (figure 1)
Press ‘A’ to enter “amps zero” and “reset” mode screen
(figure 2)
Press ‘V’ to exit.
To reset the unit back to factory settings press and hold
button C until “RESET” begins to flash, release button C,
The display will continue to flash for approx 2-3 seconds.
Unit is now reset to factory settings. The screen will return
to the programming mode screen (figure 1)
10 Setup and Programming
Figure 1
Figure 2
