Copyright © BEP Marine Limited, All rights reserved
Product version: DCM3.2
Page 9
Date: 12/05/05
6 Operations
Apply Power
Power-up screen will show for 5 seconds
After 5 seconds
First screen shows the Supply Battery Volts.
Press button V
The second screen shows 2
nd
Battery volts.
Press button V again (3RD position as volt monitor)
The third screen shows the 3rd battery volts.
Press button V again (3RD position as bilge monitor)
The third screen shows the bilge monitoring
information.
§
In bilge monitor function press and hold “C” to
reset the monitor back to zero.
To exit Bilge monitoring mode and resume battery
monitoring press “V” to return to supply battery volts.
Press button A
This screen shows either charging
OR discharging Amps.
Press button C
This screen shows Capacity Remaining in
Amp Hours. This will count down when
Discharging. And count up when Charging.
Press button C again while viewing Capacity
This screen will display the remaining
Amp hours in percentage.
Alarm Enabled
When alarms are enabled in the monitor
setup the alarm symbol will display as shown.
To permanently mute an alarm
Press the A button for 2 seconds, the display
will show the mute symbol as shown, repeat to
reactivate the alarm.
