Bentone B 40 A, Инструкция по установке и обслуживанию

Страница: 5 / 44

5
Bentone
• Care must be taken by the installer to ensure that no electrical cables
or fuel lines are pinched or otherwise damaged during installation or
service.
•
Flame tubes, fan wheels and air dampers, for example, may contain
sharp edges.
- before fi rst start:
•
The burner must not be put into operation without proper safety and
protection devices.
•
Permitted ambient temperature during operation -10 to +60 °C. Max.
80% relative humidity, no condensation.
•
The surface temperature of the burner’s components may exceed
60 °C.
•
Handle with caution – the burner has moving parts, and there is risk
of crushing injuries.
•
Seal inspections must be performed during installation and servicing
to prevent leakage.
•
fi tting and installation work has been completed and approved.
•
electrical installation has been correctly performed.
•
fl ue gas ducts and combustion air ducts are not blocked.
• all actuators and control and safety devices are in working order and
correctly set.
•
If the boiler is equipped with an access hatch, this must be equipped
with a hatch opening switch connected to the burner’s safety system.
•
When in operation, the burner’s noise level can exceed 85 dBA – use
hearing protection!
- Operation:
•
Carry out all stipulated settings, service and inspection work within
the set time.
• If the oil burner control has a solid red light, contact your installer.