Bentone B 30 A2.2, Инструкция по установке и обслуживанию

Страница: 28 / 44

28
Bentone
165 405 07-2 2022-10-04
Components Service life – Recommended
replacement Service life – Recommended
replacement Operating cycles
Control system 10 years 250,000 cycles
Pressure switch 10 years 250,000 cycles
Ignition system with fl ame guard
10 years 250,000 cycles
UV fl ame sensor
10,000 h N/A
Damper motor 500,000 cycles
Contactor 10 years 500,000 cycles
Burner 1 year 3,000 h
Filter 1 year replacement 3,000 h replacement
Oil hose 1 year inspection/replacement
Nozzle 1 year replacement 3,000 h replacement
Electrodes Replacement/cleaning 1 year Replacement/ceaning 3,000 h
Brake disc Replacement/cleaning 1 year Replacement/ceaning 3,000 h
Motor 1 year 3,000 h
Drive shaft Check/replace in the event of damage Check/replace in the event of damage
Fan wheel “1 year
Replace if need for cleaning/imbalance” “3000 h
Replace if need for cleaning/imbalance”
Oil fi lter
Once a year 3,000 h replacement
Oil valve Tightness check once a year Replace if leakage detected
The burner and its components must be recycled according to applicable regulations.
7. Service
Service and maintenance work may only be performed by qualifi ed
personnel. Perform operational check of all safety systems and components
at each service. Only Enertech original parts should be used when replacing
components.
!
Use caution when operating the burner, surfaces may be hot.
7.1
Burner Service Schedule, Oil
Servicing must be carried out once a year or after 3,000 hours of operation.
7.2 Component replacement intervals