Bentel Security OmniaMOD-V2, Инструкция по установке и эксплуатации

Страница: 7 / 28

OmniaMOD-V2 modem
ATTENTION For proper interaction with the Central Station, the Mo-
dem must be programmed according to the instructions in the "Mo-
dems Setup" paragraph.
The OmniaMOD-V2 modem can perform teleservice (programming,
control, status change, receive test calls) from the BENTEL Omnia and
NormaCom (for further details see the respective manuals).
General features
r
Communication protocols: ADEMCO 10 baud in format 3+1, 3+2, 4+1, 4+2.
r
256 event memory.
r
RS232 Serial Port.
r
Power supply:
external power supply adapter, input 230 V
50 Hz, output 18 V 150 mA.
r
Housing for 12 V 1.2 Ah max. battery.
r
Dimensions W x D x H: 176 x 131 x 65 mm.
General description
The OmniaMOD-V2 is designed for telecontrol (the control of security sys-
tems via telephone). In fact, as well as recognizing the ADEMCO protocol,
it houses a 12 V 1.2 Ah max. battery (not supplied), that guarantees func-
tioning during blackout. The OmniaMOD-V2 event memory (up to 256
events) avoids data loss during communication problems with the control
program (for example, when the program is not running or is busy commu-
nicating with another modem or when the PC is not operating, due to
blackout).
+
When the modem is receiving an incoming call from a security system, it
cannot answer calls coming from other systems, due to the engaged status
of the telephone line. Therefore, avoid making several calls at the same
time (it is advisable to program different times for security system
test
calls ) or program a higher number of call attempts or send calls to several
telephone numbers.
In order to have these possibilities the Central Station must have several
telephone lines, each of which connected to an OmniaMOD-V2 modem.
Each modem must be connected to a serial port of the PC. This is possible
with the Central Station program, which can manage up to 4 modems.
OmniaMOD-V2 modem
7