Bentel Security OmniaMOD-V2, Инструкция по установке и эксплуатации

Страница: 11 / 28

CENTRAL STATION program
ATTENTION
Microsoft Windows

is a registered trade mark belong-
ing to the Microsoft Corp.; in this manual the use of the word "Win-
dows" is intended as Windows environment 3.1 or higher, whilst DOS
is intended as MS-DOS 3.3 operative system or higher.
The OmniaMOD-V2 management package for the Central Station has 2
programs.
Central Station This is the main program. It is a DOS program that runs in both Windows
and DOS. The Central Station program interprets and displays the data re-
ceived from the OmniaMOD-V2 modem according to the information pro-
grammed by the Central Station operator.
Import data This is an accessory program which runs exclusively in Windows environ-
ment. The Import Data program permits data importation to the Central
Station program. For the description of this program see the respective
paragraph.
This chapter describes the installation package and Central Station pro-
gram functioning. For the description of the Import Data program, see the
Import Data chapter.
Software installation
The Central Station program runs in both Windows and DOS, whilst, the
Import Data program runs exclusively in Windows. For this reason, two in-
stallation programs are provided, and are described in the following para-
graphs.
Install.exe This program runs in Windows environment only, and installs both pro-
grams.
Ø
Open Windows and insert the installation disk n.1 in drive A.
Ø
Run the Install. exe program and follow the instructions carefully.
Dosinst.bat Can be run in DOS environment and installs only the Central Station pro-
gram.
Ø
Insert the installation disk n.1 in drive 3"1/2 and enter:
C:\> A:\Dosinst.
Press [Enter] and follow the instructions on the screen.
Both installation programs create a directory for package function (the de-
fault setting is \BENTELCS and may be modified with Install.exe but not
with Dosinst.bat) and the appropriate sub directory:
CENTRAL STATION program
11